Site Map
|
Model 525
-
Engine:
- GM 3.0 litre. Four cylinder
overhead valve, liquid cooled, hydraulic
lifters. 65 HP @ 2500 RPM NET. Powerful and
efficient. Load sensing governor enables
true “hands-free” operation by driver.
-
-
Transmission:
-
Continuously variable Hydrostatic
pump and motor are axial-piston type.
Provides superior on-ice power with maximum
drawbar pull even at low speeds. Conveyor
augers operate at full speed, even when
slowing the vehicle for corners.
-
-
Drivetrain:
-
Four wheel drive. Rugged Dana
Spicer® axles offer the industry's highest
manufacturers approved capacities:
-
Front 4300 lbs (1950 kg)
-
Rear 6400 lbs (2903 kg)
Full Floating
-
-
Hydraulics:
-
Powerful double pump for the
vertical and horizontal augers delivers strong
conveyor performance. Hydraulic down pressure
provides superior shaving results. Direct shaft
driven "piggy-back" mount for trouble-free
service. High
quality 16 and 22 micron filters are easy to
access.
-
-
Construction:
-
Strong 2" x 5" all-welded
structural steel tubing Zamboni® chassis.
Chassis/axle combination is the key to the
525 having a 16' turning radius - a full 3'
tighter than most other machines. High quality primer used throughout.
Rust-free polyethylene ice making water tank
with easy access cover is standard.
-
-
Human Engineering:
-
Simple to drive. Easy to operate.
Safety feature brings vehicle to a complete
stop if operator's foot leaves the pedal.
Meets or exceeds A.N.S.I. safety labeling
requirements.
-
-
Facility Engineering:
-
Zamboni has the tightest turning
radius in the industry. Snow tank design
offers a lower height dumping flexibility.
Cleaner arena environment and fuel savings
result from the smaller, more efficient
engine.
500 Series Brochure
Model 525 Brochure
Model 525 Specs
-
- Information
posted on this web site is for reference
only. The Zamboni Company assumes no
responsibility for its content or use. For
product and sales information, please
contact the Zamboni
Company.
|
|
Capacities/Dimensions |
| Snow Tank |
| Actual Volume |
2.83 m3 (100 cu. ft.) |
| Compacted |
3.54 m3 (125 cu. ft.) |
| Excess Water |
416 L (110 USG, 92 IMP) |
| Water |
| Ice Making |
727 L (192 USG, 160 IMP) |
| Wash Water |
273 L (72 USG, 60 IMP) |
| Total |
1000 L (264 USG, 220 IMP) |
| Hydraulic Oil |
95 L (25 USG, 21 IMP) |
| Conveyor System |
| Horizontal Auger |
25.4 cm (10 in.) dia. |
| Vertical Auger |
25.4 cm (10 in.) dia. |
| Overall Length |
| Snow Tank Down |
4.04 m (159 in.) |
| Snow Tank Up |
5.03 m (198 in.) |
| Overall Height |
| Snow Tank Down |
2.16 m (85 in.) |
| Snow Tank Up |
3.91 m (154 in.) |
| Overall Width |
2.13 m (84 in.) |
| Wheelbase |
1.95 m (77 in.) |
| Wheel Track |
1.37 m (54 in.) |
| Turning Radius |
| At Conditioner |
4.86 m (16 ft.) |
| Shaving Blade |
| 1.27 X 12.7 X 195.6 cm |
|
| 1/2" x 5" x 77" |
|
| Vehicle Weight |
| Empty |
2985 kg (6580 lb.) |
| w/Water |
3983 kg (8780 lb.) |
|
