Zamboni® Ice Resurfacers

The Model 200 Zamboni ice resurfacer is designed for use on most rink surfaces as an economical alternative to self-propelled machines. The unit is adaptable to most tractors with a three point hitch system of adequate capacity.
The Model 200 features:

Vertical opening spring door for easy access

Positive snow tank seal

Galvanized water distribution pipe which prevents corrosion and rust

Reinforced bonded rubber paddles

Precision chain conveyor which allows for complete filling of snow tank

Rust proof polyethylene water tanks

Sealed steel adjusting screws

Rubber squeegee

Some features described may be optional at an additional cost.

Some options are required in combination with other options.

Storage room facilities:

The storage room should be heated and should have adequate floor drainage.
The room should be located close to the ice surface(s) and preferably on the same level to eliminate the need for a ramp.
Outdoor access for snow dumping and machine maintenance may be required.
All doors should be minimum of 9 ft. wide by 9 ft. high. Dimensions of the room should have a minimum of 4 ft. clearance on all sides of the machine.
A snow-melting pit should be capable of processing 50 cu. ft. of snow per hour, per ice surface.
Ice making water requirements are approximately 100 USG per hour, per ice surface. Many operators use hot water for their ice making.

PDF Download of Model 200 Brochure

Information posted on this web site is for reference only. The Zamboni Company assumes no responsibility for its content or use. For product and sales information, please contact the Zamboni Company.